As a commonly used handling tool, forks need to withstand certain loads and wear during work. In order to ensure the normal use of forks and extend their service life, it is very important to carry out daily maintenance and upkeep. This article will introduce the maintenance and upkeep methods of forks to help you better protect and use forks.

1、 Cleaning of forks

Regular cleaning: During use, the surface of the fork may become contaminated with dust, dirt, and grease. Regular cleaning should be carried out to maintain the cleanliness of the fork surface.

Cleaning method: You can use clean water or detergent to wipe the surface of the fork, and then use a dry cloth to dry the moisture. Avoid using overly strong cleaning agents or tools to avoid damage to the surface of the forks.

2、 Lubrication of forks

Lubrication parts: The lubrication parts of the fork mainly include the fork body, fork teeth, and moving parts.

Lubricant selection: You can choose lubricating oil or grease for lubrication. Lubricating oil is suitable for Sliding friction surface, and lubricating grease is suitable for equipment working at low speed, heavy load or under special conditions.

Lubrication method: Apply an appropriate amount of lubricant to the area that needs lubrication, and then wipe evenly with a clean cloth.

3、 Inspection and adjustment

Check: regularly check whether all parts of the fork are normal. If any deformation, crack, wear and other problems are found, repair or replace them in time.

Adjustment: Adjust the fork according to its usage, such as adjusting the length, height, balance, etc. of the fork body. Ensure that the forks have good stability and safety during use.

Replace worn parts: If the components of the fork are found to be severely worn or damaged, they should be replaced in a timely manner to avoid affecting the effectiveness and safety of use.